[This site - shoes and life] The durability of leather shoes lies in the quality and maintenance of leather shoes. The maintenance of leather shoes is very important. If the quality is good and the maintenance is not bad, it can achieve the purpose of both economical and practical benefits. In fact, the maintenance of leather shoes should be started from just bought, and run through the whole process of leather shoes. The maintenance of leather shoes should be started from new shoes. Most shoes have a certain waterproof function, but if it is worn on a rainy day, please apply it with a shoe polish and spray with a waterproof mist.
(1) Leather shoes are not used:
For the first time, leather shoes should be worn before new shoes are worn. Every time the leather shoes are soiled, the color and brightness of the leather shoes can be well maintained. In the process of wearing, you need to shoehorn once every two to three days.
(2) General methods for shoe polish use:
1, remove the dirt and dirt on the soles of the shoes, and use a brush to carefully brush off the dust between the seams and shoelaces.
2. Wipe the vamp dirt and coated shoe polish with a soft damp cloth (except for white and colored shoes)
3. Apply proper amount of shoe polish on the surface of leather shoes, and apply evenly the shoe polish with a soft cloth. Use a shoe polish that is the same color as the shoe or lighter in color. If you need to make leather shoes bright, and have better waterproof performance, you can apply a thin layer of oily shoe polish.
4, with a brush, so that the penetration of shoe polish into the leather, and finally with a soft cloth to polish, but also to ensure that the shoes will not stain the pants.
(3) Keep the following points in care:
1. The continuous wearing time of each pair of shoes should not be too long. When the shoes are not worn, they should be put in a cool and dry place. If bogey is immersed in water, salt cream will appear if it is immersed in excessive moisture, and it will affect the extensibility and anti-strength of the leather. It will feel hard when worn and the shoes will be easily deformed.
2, leather shoes can not be cross-dressing with others, otherwise there will be significant deformation, because people's feet are different, the shoes will be wearing a certain time will tend to be consistent with the foot.
3, leather shoes should be used to moisturize the leather surface, the shoe cavity into the stereotypes paper and desiccant placed in a ventilated place, the air temperature as much as possible to maintain at 18 ~ 20 °C.
(4) shoes maintenance tips
1, if found in pan-shoe cream, gauze or cotton dip a small amount of warm water, wipe the white cream on the upper, dry in a ventilated place, and then rub a small amount of shoe polish.
2, leather shoes should use a soft cloth or soft brush lightly wipe clean, with a special shoe polish maintenance, so as not to shoe polish and leather reaction, resulting in discoloration or damage to the cortex.
3, matte leather upper Do not polish shoe polish, water brush, apply a special cleaning agent, brush with the direction of light brush or use a special rubber shoes powder clean.
4. The upper of the oil leather is soaked with oil, and the upper can be cleaned with a dry cloth or a special product during maintenance.
5, banana peel tends to decontamination method: Take a few banana peels, use it to wipe the oil on the shoes, make the leather clean and fresh, because the banana peel contains tannin ingredients, tannins can remove oil.
1. How to identify the authenticity and quality of leather?
Sensory identification method: By touching, seeing, bending, stretching and other methods. The natural leather is squeezed with fine lines with a thumb, and the surface is full of elasticity and good leather. Larger, more wrinkled leather is less leathery. Without fine lines, it is not natural leather.
[8] [5] Brown leather: fine grain pattern, pores arranged irregularly.
Buffalo hides: Larger skin pores than yellow leather, with slightly thicker skin fibers.
[Size=+0]Sheep: Lines are arranged in a half-moon shape, softness is good, fur is dense, and the epidermis is thin
Goatskin: The patterns are arranged in a wavy pattern, thick and detailed than sheep skin, tight, real light and strong feelings.
Pig skin: The surface pattern is usually a set of three pores, the surface is rough, soft and hard
2, how to choose the right size shoes:
The heel and heel of the shoe are not tight and not fit tightly, the tip of the shoe can leave the 5-10mm pointed section can stay 20-25mm
The flank of the shoe matches the arch of the foot, and the waist gang must hold its foot
The center of gravity of the shoe should conform to the center of gravity of the foot, and the pressure on the sole of the foot is substantially uniform
If you try to wear large size shoes, you should choose a large shoe size
3, how to maintain leather shoes when it is poured into water?
On rainy days, the shoes are poured into the rain, the dirt is removed first, the water inside the shoes is sucked out, then the desiccant (if not, can be used instead of board paper) is stuffed into the shoes, put in a ventilated and cool place to dry, after half an hour, change again Desiccant. After drying, coat with raw chicken oil and then shoe polish. Put it on shoe polish after two days and avoid exposure and baking.
4. Why should I change my shoes and wear them?
If you wear it too frequently, it can cause frequent tortuous loads on your uppers and soles.
The soles of the shoes are susceptible to wear and deformation and affect the gait, resulting in leg and foot disorders.
Leather shoes have a?a target="_blank" href="http://">Conners drums, equipment, equipment, leaguers, leaguers, leaguers, leaguers, teenagers, 7.iii. Awards;
5, how to store shoes that are not used temporarily?
We wear seasonal leather shoes, and we must store and keep them in seasons. The focus should be on preventing moisture, mold, and deformation of leather shoes. Seasonal leather shoes should be cleaned of dirt, sludge and dust in a timely manner. Cracks on the vamp are to be repaired, and then shoe polish is carefully applied. Shoes can not be painted too much when collecting, because the shoes have a certain degree of volatility and dryness, too much coating, storage time, but cause the skin cracked. When collecting, it is best to paint a little raw chicken oil, lard or glycerin to keep the leather surface soft and moist without deformation.
(1) The moisture protection of leather shoes. Mainly in the shoe box or shoes put a little moisture agent, choose dry place storage.
(2) anti-mildew shoes. The shoes must be air-dried. After the shoe polish is applied, put some mothballs inside the shoes to prevent insects. Store in a well-ventilated place and keep it, and be careful of dust. To remove the shoe polish on a regular basis, especially in the mildew season, take out a blow. If you have a moldy spot, use a soft cloth to remove the moldy spot and apply it in time.
(3) worn shoes, more or less there have been some distortion. When you change it, it is a good time to repair the deformation. The method of repairing the deformation is to support the shoe support in time; the high-grade leather shoes should use the shoe support with screw adjustment. The shoe support can be used as a new one; the general shoes also use the tile-type shoe support. The front of the shoe is propped up; even if it is a low-grade leather shoe, the front tip of the leather shoe should be stuffed with waste paper to prop it up, correcting and preventing the shoes from collapsing, twisting, and tilting. Also need to deal with the need to repair the place, especially the most likely to wear the heel, to be replaced in time for the next time when wearing leather shoes intact.
6. What kind of shoe polish on the market?
General shoe polish oil is divided into three types: emulsified oil, pure oil type and liquid shoe polish.
(1) Emulsive shoe polish is a shoe polish (hose packaging) manufactured using a British-style method and is particularly suitable for use in wet and rainy areas. It consists of three components: wax, oil, and water. With the advantages of light, protection of leather and free color, it also has the ability to hide and cover the disfiguring and pigmentation of leather grain. Therefore, it can be used as a light shoe polish, but also as a shoe polish.
(2) Pure oil type shoe polish is a shoe polish (rounded tin box package) manufactured by American-style method. Its main components are wax and oil, and no water is added. Therefore, this shoe polish is more waterproof. After long-term use of this oil, the color of the shoes will gradually become lighter.
(3) Liquid shoe polish (bottled, with small sponge brush in the bottle mouth) is made of emulsifying wax and water, and some of them are mixed with a small amount of resin (because it is easy to form a surface film, it is still good without resin). This shoe polish does not need to be wiped. Simply shine on the shoe and it's light, with the advantage of being quick and easy. This liquid shoe polish can be used with generally dark, glossy shoes.
Special types of shoe polish are mainly emulsified silicone oils and transparent shoe polishes, whose functions are mainly light and waterproof. In addition, there are deerskin powder and dyeing water, which is mainly used for dyeing, and is specially used for the modification and finishing of suede shoes.
Evening Party Dress Embroidery Fabric
Embroidered Silk Fabric For Dresses,30D Chiffon Embroidery Fabric,Party Dress Embroidery Fabric,Evening Dress Embroidery Fabric
SHAOXING MINGHEE EMBROIDERY CO,LTD , https://www.minghee-china.com